EagleSoC Development Board

— A functionality-rich, low power, ARM® Cortex™-M3 based programmable system on chip development board for developers and hobbyists.

Specifications

Processor	Cypress PSoC 5LP (32-bit ARM® Cortex™-M3) Cypress CY8C5888AXI-LP096 chip (100-pin TQFP package) Up to 80MHz operation 256KB Flash program memory 64KB SRAM 2KB EEPROM 72 I/Os (62 GPIOs, 8 SIOs, and 2 USBIOs) 1.71V ~ 5.5V I/O interface voltage, up to 4 domains
Mixed-Signal Designs	Analog and digital pins are separated into different sections Digital ground and Analog ground are separated Each analog pin has one analog ground to improve the accuracy due to separate return-ground path
Supported Voltages	Support 3-Different Voltages for all I/O Banks 5.5V, 3.3V and adjustable voltage for VDD, VDDD, VDDA, and VDDIO0~3
Built-in FTDI USB-to-Serial Interface	Built-in FTDI USB-to-Serial Interface Support 3.3V and 5V I/O
Maximum Current	Supports Up to 3A in 5V and 3.3V
Programming and Debugging	Support SWD/JTAG and TRACE ports for program debugging
External Crystal Oscillators	Build-in crystal oscillators 24MHz external crystal oscillator 32.768KHz external watch crystal oscillator Support one user-defined external crystal oscillator slot (8pin DIP package)
Character LCD Display Connector	Supports either 5V or 3.3V LCD display module LCD Backlight can be controlled by P6[7] or hardware jumper
Organization	Grouped OpAmp, SIO, and I2C Connections
Support two SAR Bypass jumpers for SAR ADC input
Dimension	75mm×135mm